BASEMENT APPLICATION

ARDEX WPM 368 Single Part Barrier Membrane

38FC-SBR Fast Cure Dummy

Description

ARDEX WPM 368 is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet. It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush, roller or airless spray machine.

ARDEX WPM 368 single part damp-proof is safe to use and can be over-coated using almost any decorative paint. ARDEX WPM 368 can be applied to damp surfaces and freshly laid hardened (green) concrete and conforms to the Building Code of Australia as a waterproof membrane.

 

Substrates:

  • Brick
  • Masonry
  • Concrete block
  • Concrete
  • Stone
Contact us to request more information about this product.

ARDEX WPM 300

38FC-SBR Fast Cure Dummy

Description

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

  • Can be applied to damp surfaces
  • AS 4020:2000 Potable Water Approved
  • Hydrostatic pressure resistant waterproof membrane
  • Prevents rising damp and formation of efflorescence
  • Water based – safe to use in sensitive locations
  • Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating ToolsLocation:
    Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints.

    Colours:

    • Grey
    • Mojo Black

     

     

    Coverage:

    • Water Stop – 60m2 (1 coat)
    • Waterproof membrane – 30m2 (2 coats)

    Drying Times:

    • Recoat time: 4 hrs
    • Full cure: 7 days

    Available in store Pack Size:

    • 4L

    VOC content:

    • 26g/L
Contact us to request more information about this product.

ARDEX WPM 270

38FC-SBR Fast Cure Dummy

Description

A clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

  • Highly penetrating – ideal for porous substrates
  • Heavy duty sealer – suitable for dense concrete (>30MPa)
  • Rapid drying
  • Low viscosity binder that seals absorbent substrates and penetrates dust

Substrates:

  • Fibre-cement sheet (wet area grade) concrete
  • Marine plywood
  • Renders and screeds
  • Masonry/concrete blocks

    TECHNICAL DATA ARDEX WPM 270

    Location:

    • External

    Surfaces:

    • Floors
    • Walls

    Colours:

    • Clear

    Coverage:

    • 1L will cover approx 6m2

    Drying Times:

    • Recoat Time: 30 mins

    Pack Size:

    • 20L
Contact us to request more information about this product.

RLA 2 Part

38FC-SBR Fast Cure Dummy

Description

RLA 2 Part

Is a class II cementitious two part waterproofing membrane designed for use as an under tile membrane in wet areas and on balconies as well as swimming pools.

Contact us to request more information about this product.

RLA PU850

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

Mapei Lamposilex

38FC-SBR Fast Cure Dummy

Description

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.
TECHNICAL DATA:
Consistency: fine powder.
Workability time at +20°C: approximately 1 minute.
Storage: 12 months.
Mixing ratio: 100 g of LAMPOSILEX with 28 g
of water.
Minimum application temperature: +5°C.
Consumption: 1.8 kg/dm³ of cavities to be filled.
Packaging: 5 kg drums.

Contact us to request more information about this product.

MapeGrout T40

38FC-SBR Fast Cure Dummy

Description

Medium strength (40 MPa) thixotropic mortar for the repair of concrete.
Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Mapegrout T40 is also recommended for repair work in tunnels, canals and water works in general.
Mapegrout T40 can also be used to repair surfaces permanently in contact with drinking water.
Mapegrout T40, mixed with about 16% water, forms a very workable mortar with a thixotropic consistency that is easily applied on vertical surfaces without shuttering.
Mapegrout T40 is applied by trowel, float or plaster sprayer on damp supports that are solid and free of loose sections, which have previously been saturated with water.
Repairs up to 30-35 mm thick in a single coat can be made.
Consumption
18.5 kg/m2 per cm of thickness.
Packaging
25 kg bags.

Contact us to request more information about this product.

Mapei Plastimul

38FC-SBR Fast Cure Dummy

Description

Bituminous emulsion waterproofer and adhesive.
Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc.
Due to its adhesive characteristics, Plastimul can be used to bond insulating materials such as cork, rockwool, etc.
When mixed with cement and aggregate, Plastimul can be used for minor repairs to asphalt paving subject to light traffic.
Plastimul is a water emulsion of selected bitumens with a pasty consistency, that is totally solvent-free. To use as a waterproofer apply the Plastimul in several layers until the desired thickness is obtained.
After drying, Plastimul forms a flexible, waterproof layer.
Consumption
– for waterproofing: 1-4 kg/m2 depending on the type of application;
– as an adhesive for insulating panels: 2-3 kg/m2.
Packaging
30 and 8 kg drums.

Contact us to request more information about this product.

Mapei Idrosilex Pronto

38FC-SBR Fast Cure Dummy

Description

Ready-to-use heavy-duty waterproofing cementitious mortar.
Use Idrosilex Pronto to waterproof foundations, walls, cellars, basements, lift-rooms, swimming-pools, canals and reservoirs.
Formulated from cement binders and special waterproofing additives, Idrosilex Pronto is prepared by mixing a 20 kg bag with 4.4 – 4.8 litres of clean water.
Idrosilex Pronto can be applied with a brush, trowel or spray.
For application by brush or spray, apply 2-3 coats to a perfectly clean and solid substrate which must be thoroughly soaked with water beforehand. When applying by trowel reduce the mixing water slightly.

Consumption
1.6 kg per mm of thickness.
Packaging
20 kg bags (grey)

Contact us to request more information about this product.

Mapei Mapelastic Foundation

38FC-SBR Fast Cure Dummy

Description

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.
TECHNICAL DATA:
Consistency: thixotropic.
Mixing ratio: comp. A: comp. B = 2.2 : 1.
Pot life of mix: approximately 1 hour (at +20°C).
Application temperature range: from +5°C to +40°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 – coating (C) principles PI, MC and IR and EN 14891 norm.
EMICODE: EC1R Plus – very low emission.
Storage: 12 months.
Application: roller or spray.
Consumption:
– by roller: 1.65 kg/m² per mm of thickness;
– by spray: 2.2 kg/m² per mm of thickness.
Packaging:
32 kg kits:
– component A: 22 kg bags;
– component B: 10 kg tanks.

Contact us to request more information about this product.

Construction Chemicals Crystal Sealer

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

Elastoproof Base Collars

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.