RLA Moisture Seal is a water based 2 part epoxy designed as a water and vapour proof coating under water proofing
membranes and / or adhesives..
Areas of use:
• Used as a base water proofing system prior to the application of water proofing membranes or adhesives where a water
and vapour transmission barrier is required.
• Suitable for use in conjunction with other coatings – examples – decorative paints, protective coatings, tiling adhesives and
other floor preparation products.
• Retaining walls , planter boxes, lift wells, concrete tanks, basements, tanks, reservoirs, aquaducts, underground car parks etc.
Features:
• Australian Made
• Convenient mixing ratio 1:1 by volume
• Easy clean up with water
• Withstands hydrostatic head of water
pressure up to 25 metres or 250 kPa
Acceptable Substrates:
• Concrete, Pre cast concrete, Bricks, Masonry, Cement sheet, Structural plywood, Metal. Ensure all oil, rust or other deleterious
matter is removed prior to application.

For use in conjunction with the Elastoproof B50 Joint Band for effective detailing at critical 90° and 270º corner intersections. Prefabricated corners ensure a seamless and elastic seal, overcoming many difficulties when detailing membranes at volatile areas.

• Protection for critical corner intersections
• Ensures effective detailing at critical 90° and 270° corner intersections
• Overcomes difficulties when detailing at volatile areas

USES:

• Internal Corners – designed for 90° corners to form a seamless seal over corner intersections
• External Corners – designed for 270° corner sections to form a seamless seal between wall intersections. Ideal for pillars columns and outside returns

Uses

Multithane Std is designed to waterproof most non-exposed applications within the building and construction industry including:

Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, water retaining structures (e.g. tanks), pits and bunding areas.

Multithane Std is a single pack, liquid applied, moisture curing, self leveling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane. Multithane Std bonds well to most suitably primed building substrates and is suitable for above and below ground applications.
Colour: Grey.

Multithane Std meets the criteria of:

• AS4858:2004 Wet Area Membranes
• AS4654.2 Exterior, for non UV exposed applications
• the ‘Green Star’ environmental criteria.

The product exhibits excellent chemical resistance and has been formulated to inhibit biological growth.

Multithane Std is one of four versions within the Multithane range which include: Multithane UV; Multithane HV (High Viscosity  anti-‘sag’) and Multithane HV UV. Please refer to these product data sheets for more information.

Uses

Multithane Std is designed to waterproof most non-exposed applications within the building and construction industry including:

Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, water retaining structures (e.g. tanks), pits and bunding areas.

Unique bitumen compound designed for applications where high build finishes are required. Application is by spatula or trowel achieving film builds in excess of 10mm in a singular application. Under compression the waterproofing properties and water vapour transmission properties are further enhanced offering an ideal durable membrane for subterranean applications

• Solvent free, non flammable and non toxic
• Up to 10mm build in one application
• High impact and abrasion resistance