REMEDIAL WATERPROOFING

ARDEX WPM 368 Single Part Barrier Membrane

38FC-SBR Fast Cure Dummy

Description

ARDEX WPM 368 is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet. It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush, roller or airless spray machine.

ARDEX WPM 368 single part damp-proof is safe to use and can be over-coated using almost any decorative paint. ARDEX WPM 368 can be applied to damp surfaces and freshly laid hardened (green) concrete and conforms to the Building Code of Australia as a waterproof membrane.

 

Substrates:

  • Brick
  • Masonry
  • Concrete block
  • Concrete
  • Stone
Contact us to request more information about this product.

Mapei Lamposilex

38FC-SBR Fast Cure Dummy

Description

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.
TECHNICAL DATA:
Consistency: fine powder.
Workability time at +20°C: approximately 1 minute.
Storage: 12 months.
Mixing ratio: 100 g of LAMPOSILEX with 28 g
of water.
Minimum application temperature: +5°C.
Consumption: 1.8 kg/dm³ of cavities to be filled.
Packaging: 5 kg drums.

Contact us to request more information about this product.

MapeGrout T40

38FC-SBR Fast Cure Dummy

Description

Medium strength (40 MPa) thixotropic mortar for the repair of concrete.
Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Mapegrout T40 is also recommended for repair work in tunnels, canals and water works in general.
Mapegrout T40 can also be used to repair surfaces permanently in contact with drinking water.
Mapegrout T40, mixed with about 16% water, forms a very workable mortar with a thixotropic consistency that is easily applied on vertical surfaces without shuttering.
Mapegrout T40 is applied by trowel, float or plaster sprayer on damp supports that are solid and free of loose sections, which have previously been saturated with water.
Repairs up to 30-35 mm thick in a single coat can be made.
Consumption
18.5 kg/m2 per cm of thickness.
Packaging
25 kg bags.

Contact us to request more information about this product.

Mapei Idrosilex Pronto

38FC-SBR Fast Cure Dummy

Description

Ready-to-use heavy-duty waterproofing cementitious mortar.
Use Idrosilex Pronto to waterproof foundations, walls, cellars, basements, lift-rooms, swimming-pools, canals and reservoirs.
Formulated from cement binders and special waterproofing additives, Idrosilex Pronto is prepared by mixing a 20 kg bag with 4.4 – 4.8 litres of clean water.
Idrosilex Pronto can be applied with a brush, trowel or spray.
For application by brush or spray, apply 2-3 coats to a perfectly clean and solid substrate which must be thoroughly soaked with water beforehand. When applying by trowel reduce the mixing water slightly.

Consumption
1.6 kg per mm of thickness.
Packaging
20 kg bags (grey)

Contact us to request more information about this product.

Construction Chemicals Crystal Sealer

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.