ROOF TOP AREA

ARDEX WPM 157 One component polyurethane

38FC-SBR Fast Cure Dummy

Description

ARDEX WPM 157 is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks.

  • Excellent flexibilty – acommodates building movement
  • Single component – ready to use, no mixing required
  • Excellent chemical resistance
  • Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools
  • Substrates:
    • Concrete
    • Renders and screeds
    • Fibre cement
    • Plasterboard
Contact us to request more information about this product.

ARDEX WPM 300

38FC-SBR Fast Cure Dummy

Description

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

  • Can be applied to damp surfaces
  • AS 4020:2000 Potable Water Approved
  • Hydrostatic pressure resistant waterproof membrane
  • Prevents rising damp and formation of efflorescence
  • Water based – safe to use in sensitive locations
  • Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating ToolsLocation:
    Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, liftwells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints.

    Colours:

    • Grey
    • Mojo Black

     

     

    Coverage:

    • Water Stop – 60m2 (1 coat)
    • Waterproof membrane – 30m2 (2 coats)

    Drying Times:

    • Recoat time: 4 hrs
    • Full cure: 7 days

    Available in store Pack Size:

    • 4L

    VOC content:

    • 26g/L
Contact us to request more information about this product.

ARDEX WPM 270

38FC-SBR Fast Cure Dummy

Description

A clear solvent-based primer designed to seal and improve the adhesion of dense or highly porous substrates.

  • Highly penetrating – ideal for porous substrates
  • Heavy duty sealer – suitable for dense concrete (>30MPa)
  • Rapid drying
  • Low viscosity binder that seals absorbent substrates and penetrates dust

Substrates:

  • Fibre-cement sheet (wet area grade) concrete
  • Marine plywood
  • Renders and screeds
  • Masonry/concrete blocks

    TECHNICAL DATA ARDEX WPM 270

    Location:

    • External

    Surfaces:

    • Floors
    • Walls

    Colours:

    • Clear

    Coverage:

    • 1L will cover approx 6m2

    Drying Times:

    • Recoat Time: 30 mins

    Pack Size:

    • 20L
Contact us to request more information about this product.

RLA Moisture Seal 2P Epoxy Vapour Barrier 20lt Kit

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

AFTEK Epilox Epoxy Binder

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

Mapei Aquaflex WPU

38FC-SBR Fast Cure Dummy

Description

Ready-to-use quick drying and flexible Class III water-based hybrid polyurethane membrane for internal and external waterproofing applications

TECHNICAL DATA:
Consistency: thixotropic paste.
Application temperature range: from +5°C to +35°C.
Waiting time between first and second coat: approximately 2-4 hours.
Waiting time before tiling or topping over: 24 – 48 hours at +23°C.

Minimum applicable thickness: 1.5 mm in 2 coats.
Colour: light grey
Storage: 24 months.
Application: roller, brush or trowel.
Consumption:
• Approx. 750ml/m²/coat or 1.5 litres per mm of thickness

For exposed flat roof applications it is recommended to apply 3 coats to achieve a 1.3mm DFT

Packaging: 15 litre drums.

Contact us to request more information about this product.

Mapei Mapeband

38FC-SBR Fast Cure Dummy

Description

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membranes.

Applications:
Flexible waterproofing of expansion joints of terraces, balconies, etc. and of wall joints and floor to wall joints to be treated with Mapegum WPS, Mapelastic, Mapelastic Smart, Monolastic or Monolastic Ultra. Waterproofing of expansion joints of precast panels, piping, bath, shower and kitchen drains using the special Mapeband gaskets.
N.B. The joints between the Mapeband pieces must be bonded with Adesilex T?Super or Adesilex LP.

Technical data:
Length: 50 m.
Width: 120 mm.
ULTIMATE ELONGATION: > 400%.
Packaging
50 m x 12 cm rolls;
sealing gasket for outlets
118 x 118 mm and 300 x 300 mm;
inside corner 90°
outside corner 270°.

Contact us to request more information about this product.

RLA 2 Part

38FC-SBR Fast Cure Dummy

Description

RLA 2 Part

Is a class II cementitious two part waterproofing membrane designed for use as an under tile membrane in wet areas and on balconies as well as swimming pools.

Contact us to request more information about this product.

ELASTOPROOF CORNERS Prefabricted Corner Sections

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

Soudal Australia Multibond SMX25

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

Aftek Flex Pro MS

38FC-SBR Fast Cure Dummy

Description

AFTEK® FLEX-PRO MS is a high quality, neutral, elastic, 1-component construction joint and adhesive sealant that is based upon Flexible Hybrid Polymer. It has excellent flexibility and adhesion properties to most common building substrates, and suitable for use on damp surfaces.

Contact us to request more information about this product.

RLA PU850

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

RLA UNIGRIP

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

ARDEX FG8 Grout

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.

CA PRO-UV

38FC-SBR Fast Cure Dummy

Description

PRO-UV is an elastomeric one part polyurethane/Acrylic fibre reinforced water based membrane developed as a high performance internal/ external membrane for most general waterproofing applications. It is suitable for external applications where a UV stable, occasional trafficable membrane is required.

Features and Benefits
• 12 months shelf life in unopened containers
• Tough flexible film when cured
• Class III membrane certified to ASTM 4858:2004 wet area membranes when applied in accordance to AS3740:2010
• Tested in Accordance to AS4654.1 2012 for suitability for external use
• Low VOC content
• Single pack no mixing
• Excellent adhesion to a wide variety of substrates
• Safe and easy to use
• UV stable for external applications
• Can handle light maintenance traffic once fully cured

Available in 15lt

Contact us to request more information about this product.