WATERBASE MEMBRANES

ARDEX WPM 155 RAPID

38FC-SBR Fast Cure Dummy

Description

ARDEX WPM 155 Rapid is a water based polyurethane-acrylic waterproofing membrane developed for high performance under-tile waterproofing.

  • Fast drying Polyurethane acrylic membrane
  • Excellent film build – easy to gauge thickness
  • Class III membrane – in accordance with AS4858 requirements
  • Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools
  • Substrates:
    • Concrete, Renders and Screeds, Fibre Cement, Plasterboard, Plywood

      Location:

      • Internal Wet Areas, Balconies, Decks, and other areas that will be tiled or otherwise protected by regular foot traffic

      Surfaces:

      • Walls
      • Floors

      Colours:

      • Blue/Grey

      Coverage:

      • Walls 17.2m2 (2 coats) D.F.T. – 0.5mm
      • Floors 17.2m2 (2 coats) with ARDEX STB Tape – D.F.T. – 0.5mm
      • Floors 8.6m2 (2 coats) D.F.T. – 1.0mm

      Drying Times:

      • Recoat Time: 1-2 hours
      • Ready to Tile: 4-6 hours
      • Full Cure: 3 days

      Packaging:

      • 15L (20kg) pails

      VOC content:

      • 42g/L
Contact us to request more information about this product.

Mapei Aquaflex WPU

38FC-SBR Fast Cure Dummy

Description

Ready-to-use quick drying and flexible Class III water-based hybrid polyurethane membrane for internal and external waterproofing applications

TECHNICAL DATA:
Consistency: thixotropic paste.
Application temperature range: from +5°C to +35°C.
Waiting time between first and second coat: approximately 2-4 hours.
Waiting time before tiling or topping over: 24 – 48 hours at +23°C.

Minimum applicable thickness: 1.5 mm in 2 coats.
Colour: light grey
Storage: 24 months.
Application: roller, brush or trowel.
Consumption:
• Approx. 750ml/m²/coat or 1.5 litres per mm of thickness

For exposed flat roof applications it is recommended to apply 3 coats to achieve a 1.3mm DFT

Packaging: 15 litre drums.

Contact us to request more information about this product.

CA PRO-UV

38FC-SBR Fast Cure Dummy

Description

PRO-UV is an elastomeric one part polyurethane/Acrylic fibre reinforced water based membrane developed as a high performance internal/ external membrane for most general waterproofing applications. It is suitable for external applications where a UV stable, occasional trafficable membrane is required.

Features and Benefits
• 12 months shelf life in unopened containers
• Tough flexible film when cured
• Class III membrane certified to ASTM 4858:2004 wet area membranes when applied in accordance to AS3740:2010
• Tested in Accordance to AS4654.1 2012 for suitability for external use
• Low VOC content
• Single pack no mixing
• Excellent adhesion to a wide variety of substrates
• Safe and easy to use
• UV stable for external applications
• Can handle light maintenance traffic once fully cured

Available in 15lt

Contact us to request more information about this product.

Mapei Plastimul

38FC-SBR Fast Cure Dummy

Description

Bituminous emulsion waterproofer and adhesive.
Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc.
Due to its adhesive characteristics, Plastimul can be used to bond insulating materials such as cork, rockwool, etc.
When mixed with cement and aggregate, Plastimul can be used for minor repairs to asphalt paving subject to light traffic.
Plastimul is a water emulsion of selected bitumens with a pasty consistency, that is totally solvent-free. To use as a waterproofer apply the Plastimul in several layers until the desired thickness is obtained.
After drying, Plastimul forms a flexible, waterproof layer.
Consumption
– for waterproofing: 1-4 kg/m2 depending on the type of application;
– as an adhesive for insulating panels: 2-3 kg/m2.
Packaging
30 and 8 kg drums.

Contact us to request more information about this product.

CA Pro-Lx

38FC-SBR Fast Cure Dummy

Description

PRO-LX is a waterborne flexible waterproof membrane designed for use under tiled finishes that is capable of accommodating expected structural movement PRO-LX is a certified Class III membrane and is compliant to AS4858:2004 : “Wet Area Membranes”, when applied in accordance to AS3740:2010 “waterproofing Wet Areas in Residential Buildings”.

Features and Benefits
• Permanently flexible
• Class III membrane certified to ASTM 4858:2004 wet area membranes when applied in accordance to AS3740:2010
• Low VOC content
• Single pack no mixing
• Excellent adhesion to a wide variety of substrates
• Safe and easy to use
• Quick Drying
• Fibre Reinforced
• Designed for use with a bond breaker
Available in 15Lt

Contact us to request more information about this product.

Gripset 59 High Build Bitumen

38FC-SBR Fast Cure Dummy

Description

Contact us to request more information about this product.